Cobetter BevClear® AB Filter Cartridges, composed of a polypropylene media, are absolute-rated with high dirt holding capacity, long service and high flow rates. This type of media provides absolute and reliable efficiency for particle retention in beverage filtration.
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message
Material of Construction
| Filter Medium | Multi-Layer Melt Blown Polypropylene |
| Support Layer | Polypropylene |
| Core/Cage/End Caps | Polypropylene |
Operating Conditions
| Maximum Temperature | 80°C |
| Max.Differential Pressure | 5.0 bar / 21°C (forward flow) 2.0 bar / 80°C (forward flow) 2.0 bar / 21°C (reverse flow) |
| Steam Sterilization | ≥20 cycles (121°C/30 min @ Max.Differential Pressure of 0.5 bar) |
| Hot Water Sterilization | 85°C/30 min @ Max.Differential Pressure of 2.0 bar |
| Cleaning Solution | 2% NaOH Solution @≤ 65°C |
| Effective Filtration Area | 0.53 m² / Ф71-10 inch |
Food and Biological Safety
| Extractables | < 30mg per 10 inch |
| Endotoxins | < 0.25EU/mL |
Meets the requirements for food contact: European Regulation (EC) Number 1935/2004
Flow Rate Characteristics
Retention Characteristic
| Retention Rates (%) | ||||||||
| 1.0μm | 3.0μm | 4.0μm | 5.0μm | 6.0μm | 7.0μm | 10μm | 20μm | |
| BCAB0020 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0030 | ≥99.98 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0050 | ≥99.90 | ≥99.98 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0065 | ≥99.50 | ≥99.90 | ≥99.98 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0080 | ≥99.20 | ≥99.50 | ≥99.90 | ≥99.98 | ≥99.99 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0100 | ≥99.00 | ≥99.20 | ≥99.50 | ≥99.90 | ≥99.98 | ≥99.99 | ≥99.99 | ≥99.99 |
| BCAB0300 | ≥99.00 | ≥99.20 | ≥99.50 | ≥99.90 | ≥99.98 | ≥99.99 | ≥99.99 | |
| BCAB0400 | ≥99.00 | ≥99.20 | ≥99.50 | ≥99.90 | ≥99.98 | ≥99.99 | ||
| BCAB0500 | ≥99.00 | ≥99.20 | ≥99.50 | ≥99.90 | ≥99.98 | |||
| BCAB0600 | ≥99.00 | ≥99.20 | ≥99.50 | ≥99.90 | ||||
| BCAB0700 | ≥99.00 | ≥99.20 | ≥99.50 | |||||
| BCAB1000 | ≥99.00 | ≥99.20 | ||||||
| BCAB2000 | ≥99.00 | |||||||
Tested by ISO 12103-1 A4 Coarse Test Dust
| BCAB | Removal Ratings | End Cap | Nominal Length | Seal Material | -F | ||
| [Ф71] | 0020=0.2μm | 0400=4.0μm | DOE=Double Open End | 05= 5" | S=Slilicone | ||
| 0030=0.3μm | 0500=5.0μm | HTC=222 O-ring/Flat (PBT Insert) | 10= 10" | E=EPDM | |||
| 0050=0.5μm | 0600=6.0μm | HTF=222 O-ring/Fin (PBT Insert) | 20= 20" | V=Viton | |||
| 0065=0.65μm | 0700=7.0μm | HSF=226 O-ring/Fin (PBT Insert) | 30= 30" | ||||
| 0080=0.8μm | 0800=8.0μm | SSF=226 O-ring/Fin (SS Insert) | 40= 40" | ||||
| 0100=1.0μm | 1000=10μm | SSC=226 O-ring/Flat (SS Insert) | |||||
| 0300=3.0μm | 2000=20μm | ||||||
