Cobetter- H-FRP-150 filter housing is made of glass fiber reinforced plastic material, especially suitable for seawater, brine and other applications. The performance characteristics of FRP make it have good corrosion resistance and guarantee long-term use. The HF150 series high-flow filter element is used inside. A 6-inch diameter HF150 is equivalent to 10-25 2.5 ”deep-layer filter elements, which effectively reduces the number of filter elements and the diameter of the filter barrel at the same flow rate.
H-FRP Housing
High Anti-Corrosive Performance Economical Design
Cobetter- H-FRP-150 filter is made of glass fiber reinforced plastic material, especially suitable for seawater, brine, brine and other applications. The performance characteristics of FRP make it have good corrosion resistance and guarantee long-term use. The HF150 series high-flow filter element is used inside. A 6-inch diameter HF150 is equivalent to 10-25 2.5 ”deep-layer filter elements, which effectively reduces the number of filter elements and the diameter of the filter barrel at the same flow rate. The Cobetter-H-FRP-150 series has 3 specifications. 1 core, 3 cores, and 12 cores, which is able to meet the needs of different flows. H-FRP-150-12 can reach a maximum flow of 1000m³/ h.
|
|
Model | H-FRP150-1 | H-FRP150-3 | H-FRP150-12 | |
Parameters | Filter element diameter | 6" | 6" | 6" |
| Filter length | 40"/60"/80" | 40"/60"/80" | 40"/60"/80" | |
Number of filter elements | 1 | 3 | 12 | |
| Filter material | PP/GF | PP/GF | PP/GF | |
| Flow direction | Inside to outside Outside to inside | Inside to outside Outside to inside | Inside to outside Outside to inside | |
Design Parameters
| Standard design flow | 30 / 45 / 60 m³/h | 90 / 135 / 180 m³/h | 360 / 540/ 720 m³/h |
| Design flow | 40 / 60 / 80 m³/h | 120 / 180 / 240 m³/h | 480 / 720 / 960 m³/h | |
| Design pressure | 0.6 / 1.0Mpa | 0.6 / 1.0Mpa | 0.6 / 1.0Mpa | |
| Set tempreture | -10~65°C | -10~65°C | -10~65°C | |
Texture | Shell material | FRP | ||
| Seal ring material | Silicone /EPDM /Viton |
| Number of Filters | Filter Length | Flow Direction | Sealing Material | Design Pressure | ||||||
| H-FRP150 | 01 03 12 | 1 round 3 round 12 round | 20 40 60 80 | 20 inch 40 inch 60 inch 80 inch | I O | From inside to outside From outside to inside | S E V | Silicone EPDM Viton | X Y Z | 0.6MPa 1.0MPa Customize |
FRP Filtration System Design
At the design stage, professional engineers from Cobetter will design and provide a complete set of filtration systems based on your comprehensive flow requirements. Application on Water Treatment System by Membrane:Electronics, Power Generation, Metallurgy, Chemical Industry, Food & Beverage, Brackish Water, Seawater Desalination, Garbage Permeate etc. FRP-150-1 and H-FRP-150-3, built-in 1 and 3 filter elements, single unit application or combined system both could meet the needs of large flow The system integration is similar to the installation method of RO reverse osmosis membrane shell, and the combination is flexible without being limited by space; The interfaces are all side-connected to facilitate the replacement of the filter element; The filter comes with a filter element positioning and support assembly to facilitate the installation of the filter element. Technical characteristics Single-core FRP filter is suitable for 20 "/ 40" / 60 " high-flow folding filter element. FRP filter has better corrosion resistance than stainless steel filter. Glass fiber reinforced plastic pipe has higher strength than PVC pipe. The glass fiber reinforced plastic pipe can significantly reduce the manufacturing cost and reduce the frame height. The design is flexible and the filter element is easy to replace. Excellent corrosion resistance and high strength. Flexible design for horizontal or vertical installation. Space saving and Cost saving up to 30%. | Multi-core contains filter |
| Code | Filter Dimention | Filter Quantity | Flow Rate | ||||
H-FRP-1-40 H-FRP-1-60 H-FRP-1-80 H-FRP-3-40 H-FRP-3-60 H-FRP-3-80 H-FRP-12-40 H-FRP-12-60 H-FRP-12-80 | 6”×40” 6”×60” 6”×80” 6”×40” 6”×60” 6”×80” 6”×40” 6”×60” 6”×80” | 1 1 1 3 3 3 12 12 12 | 40m³/h 60m³/h 80m³/h 120m³/h 180m³/h 240m³/h 480m³/h 720m³/h 960m³/h |
Max Pressure：1.0Mpa
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by info.industry@cobetterfilter.com or leave a message.
COPYRIGHT 2014 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
