HF150 High Flow Filter Cartridge

Cobetter high flow filter cartridge is designed for membrane process high flow desalination plants.The high flow filter is a large diameter, single open ended pleated filter cartridge. The filter diameter is 6"/152 mm, with large filtration area,and high flow rate up to 90m³/hr. It can be widely used in various industries, with less quantity,less downtime for change-out and significant cost saving.

  • High density pleated filter type resulting in a high filtration area, high flow rates, longer service life, and high dirt holding capacity.
  • Multi-layered design provides gradient filtration.
  • Reduce Condensation. Vapor-permeable perperty.
  • Internal PP core guarantees no distortion and resists higher reverse differential pressure.
  • Ergonornically designed handle facilities fast and easy Installation and remove without special tools.



    Industrial           
    Municipal Water, Pre-RO Filtration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate
    Petrochemicals
    Water-flooding, Produced Water, Enhances Oil Recovery, Completion Fluids, Amine Sweetening, Finial Products
    Chemical
    Quench Water, Aqueous Salt Solutions, Final Products
    Electronics
    Pre-RO Filtration, Process Water
    Food & Beverage
    Process Water
    Pharmaceutical
    Process Water


High Flow 02.png


Operating Conditions


PP 

GF

  Filter Media

Pleated Polypropylene
depth structur

Rein bonded glass fiber /
Polyester support

  Support/Drainage

PolypropylenePolyester

  End Caps

Glass filled

polypropylene


  Core

Polypropylene

  Outside Material

PP Cage (HFPP150 Series)PET Net (HF150 Serise)

  Max. Operating
  Temperature

80°C121°C

  Max. Differential
  Pressure

HFPP150 (PP Cage)             HF150 (PET Net)
0.40 Mpa/21°C                      0.38 MPa/21°C

                                              0.15 MPa/80°C


Flow Rate Characteristics

  Length

20"40"60"

  Design Flow

15 m³/h30 m³/h45 m³/h

  Max. Allowable Flow

30 m³/h60 m³/h90 m³/h

  Filtration Area

2.8 m²5.6 m²8.4 m²


Retention Rate Characteristics

 Particle Size

Filtration Efficiency HF150NB

PP0.8μm

PP1.0μm

PP2.0μm

PP3.0μm

PP5.0μm

PP10μm

PP20μm

 ≥1μm

99.89%99.82%95.00%86.97%79.86%42.23%24.38%

 ≥2μm

99.97%

99.87%

98.64%

86.97%

90.09%

70.49%

40.09%

 ≥5μm

100.0%

99.93%

99.90%

98.86%

98.36%

82.26%

76.66%

 ≥8μm

100.0%100.0%99.97%99.20%98.88%95.25%82.60%

 ≥10μm

100.0%100.0%100.0%99.58%98.39%98.18%89.42%

 ≥12μm

100.0%100.0%100.0%99.78%99.57%98.76%97.41%

 ≥25μm

100.0%100.0%100.0%100.0%100.0%99.34%99.14%


High Flow 03.pngHigh Flow 04.png
High Flow 05.pngHigh Flow 06.png



Filter Performance Comparison I

High Flow 08.png


Filter Performance Comparison II

    Element and Filter Housing Comparison



HF150-food-&-Beverage.png





    Time and Labor for Changeout
xj05 Time and Labor for ChangeoutHFPP150 Flow System can reduce 90% of the filter elements when compared to the conventional Ø2.5” System. This system is 2 to 3 times smaller than depth or pleated filter systems. The reduction in necessary filter elements and smaller system size decreases production downtime and maintenance cost.




End Cap Configuration

High Flow 07.png




Ordering Information



Filter MediaRemoval RatingsNominal LengthSeal Material

HFPP150 

(PP Cage)
HF150NB

(PET Net)
HFM150
DSHF150
G1HF150
N1HF150
N2HF150
N3HF150
N4HF150
N5HF150
JL-150


PP

GF

0050=0.5μm

0080=0.8μm

0100=1.0μm

0200=2.0μm

0300=3.0μm

0500=5.0μm

1000=10.0μm

1500=15.0μm
2000=20.0μm
4000=40.0μm
7000=70.0μm
9000=90.0μm



10= 10"

20= 20"

30= 30"

40= 40"

S=Slilicone

E=EPDM

V=Viton

-C







For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by info.industry@cobetterfilter.com or leave a message.




Contact Form
Corporate name* Department*
Name*
E-mail address*
Tel
Address
Leaving a message